Nec EXPRESS 320Lb Manual do Utilizador descarregar pdf (Página 12)

2-2 Windows 2000 Advanced Server Installation

What You Need

You can use EXPRESSBUILDER to reinstall the Windows 2000 Advanced

Server operating system if it becomes corrupted or unusable. To reinstall

Windows 2000 Advanced Server, you need the following:

! EXPRESSBUILDER CD

! Microsoft Windows 2000 Advanced Server CD

! Microsoft Windows 2000 Service Pack 3 CD and above.

Initial Setup

Perform the following initial setup before doing the Windows 2000 Advanced

Server installation.

1. Connect the mouse, keyboard, monitor, and any other peripherals.

CAUTION

OS installation must be performed with only PCI module #1

installed and with only one hard disk drive installed in slot #1

of PCI module #1. Otherwise, the keyboard, mouse and

additional hard disk drives may not be recognized..

2. Remove PCI module #2 from the server. Refer to Chapter 4 of your user’s

guide for information on removing PCI modules.

3. Remove hard disk drives installed in slots #2 and #3 of PCI module #1.

Refer to Chapter 4 of your user’s guide for information on removing hard

disk drives from PCI modules.

4. Remove any optional PCI boards installed in PCI module #1. Refer to

Chapter 4 of your user’s guide for information on removing PCI option

boards.

5. Remove any LAN cables connected to the server.

6. Power up the server and its peripherals.

7. At the startup screen, when prompted, press F2 to enter the BIOS Setup and

disable Boot Monitoring.

! Select Advanced on the BIOS Setup Main Menu.

! Select Monitoring Configuration on the Advanced window and press

Enter.

! Select Boot Monitoring and change the setting to Disabled to disable

Boot Monitoring.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Sem comentários

Nec EXPRESS 320Lb Manual do Utilizador Página 12