Nec Express5800 Series EXP320B Manual do Utilizador descarregar pdf (Página 235)

Installing and Using Utilities 5-51

but the link cable of a teamed LAN is connected to only one side of the modules or when a

storage device connected by FC is connected to only one side of the modules.

Procedure in NEC ESMPRO Manager

 Start

1. Select the target component in the [ft] tree.

2. Check the current state with the "State" display on the target component screen.

3. Click the [Bring Up] button in the [Maintenance] screen for the target component.

A certain time is required for the start.

The start result can be confirmed by "State" on the target component screen. The result of

the start operation is reported by the server as an alert.

CHECK:

When starting a stopped IO module, diagnostics of the CPU/IO modules are

automatically performed. The IO module is started after the diagnostics.

 Stop

Perform the procedure below before replacing a component.

1. Select the target component in the [ft] tree.

2. Check the current state with the "State" display on the target component screen.

3. Click the [Bring Down] button in the [Maintenance] screen for the target component.

A certain time is required for the stop.

The stop result can be confirmed by "State" on the target component screen. The result of

the stop operation is reported by the server as an alert.

CHECK:

When stopping IO module, check that the status of Ethernet is “Duplex” on NEC

ESMPRO Manager. Do not stop the IO module especially when LAN is connected

only to the IO module on that side.

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 357 358

Sem comentários

Nec Express5800 Series EXP320B Manual do Utilizador Página 235