NEC NEAX 2000 IVS Manual do Utilizador descarregar pdf (Página 12)

ND-45503 (E) CHAPTER 1

Page 3

Revision 2.0

4.DATA PROGRAMMING PROCEDURE

Table 1-1 shows the procedure and the outline of the work related data programming for the system.

The various data programmed in this manual are entered into the system through the CAT/MAT.

Table 1-1 Data Programming Procedure

STEP WORK REMARKS

1. Obtain the customer’s requirements, and fill in the

Customer Specification Sheets on Chapter 2.

2. Allocate the LC, TRUNK and other interface cards to

the Port Assignment Table on Chapter 2. Make a Bay

Face Layout on Chapter 2 for accommodating cards

required in the system.

3. Fill in the data programming sheets on Chapter 3 with

the Customer Specification Sheet, Port Assignment

Table and Bay Face Layout completed as steps 1 and

For the programming method and the detailed

information on the Command, refer to the Command

Manual.

4. Ensure that the data on all programming sheets are

correct and consistent with customer specifications.

5. Specify the switch setting on the boards with the

Switch Setting Table in the Circuit Card Manual.

For the function of each switch on the cards, refer to

the Circuit Card Manual.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 188 189

Sem comentários

NEC NEAX 2000 IVS Manual do Utilizador Página 12