NEC Express5800/120Lh Guia do Utilizador

１ Keep this User’s Guide at hand for quick reference at any time it may be required. Read “SAFETY NOTES” first, then set up this kit. Provide this Us

１０ (3) When the distance is from 700mm to 742mm, use the arm support (1) to adjust the position of cable arm. (4) When the distance is from 745mm to

１１ (6) Check to see that no excess force is applied to the cable arm by pulling out the server and pushing it back in. And this cable arm is rotated

１２ (9) Check to see that no excess force is applied to cables by pulling out the server and pushing it back in. And this cable arm is rotated to b

１３ Step 4 Applying the labels (1) Stick the model name label corresponding to each model on the front cover. (2) Stick the icon label corresponding

１４ Chapter 3 Operation Step 1 Attaching/Removing the arm stopper This cable arm is rotated to backside for connection of external cables and exc

１５ Step 2 Sliding the server out from the rack It is necessary to slide the server out from the rack when doing maintenance of the internal compon

２ Chapter 1 Preparation for Installation This chapter describes preparations required for installing the server on a 19-inch rack step by step. Ste

３ No. Part Name QTY Notes 1 Front Cover 1 2 Slide Rail Assembly 2 3 Cable Arm 1 4 Arm Bracket 1 5 Arm Stopper 1 6 Arm Support

４ Device Cover Chapter 2 Installation This chapter describes the procedures for installing the rack mountable server into a 19-inch rack. Step 1

５ (6) Fix the HDD cover (1 or 2) with the screw (D) to the inside of front cover. ( Do not attach the HDD cover into Hot Plug SCSI HDD (6slots) mo

６ Step2 Mounting the server into the rack (1) Fully slide the rails out until they lock in place. And while pressing down on the release lever, sli

７ (4) Loosen three screws for fixing the rear mounting bracket in order to move the rear mounting bracket. Repeat this step for the other rail.

８ (7) Slide two slide rails out from the rack until they were locked. And then with three or more persons assisting you, lift the server and align th

９ Step 3 Installing the cable arm and cables (1) Fix the arm bracket with two screws (D) to the back of the server. (2) When the di