NEC Express5800/R120f-1M Guia do Utilizador Página 72
- Página / 144
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
raidcmd
Step 1 Connect Physical Devices used for Easy
Configuration to the RAID Controller before executing
raidcmd if required.
Step 2 Execute "
econfig
" command.
Step 3 Specify the conditions on Easy
Configuration.
In step 1/3, select the RAID Controller to be
configured. Enter the RAID Controller number to be
configured.
Step 4 In step 2/3, specify the number of
Physical Devices used for Logical Drive(s) ("Physical
Device count using Logical Drive(s)") and the number
of Logical Drives to be created in the RAID Controller
("Making Logical Drive count"). If Physical Devices of
different Interface Types, Device Type or Sector
Format exist, specify the number of Physical Devices
in each type (in the example shown to the right,
proper settings are provided for Physical Devices of
the SAS interface. If other Physical Devices of
different types exist, perform the operation in each
type).
Step 5 Step 3/3 shows the configuration of the
RAID System to be configured by the Easy
Configuration. To configure the RAID System
according to the displayed information, type "yes". To
change the configuration, type "no".
If you type "yes", the raidcmd executes the
configuration of the RAID System. After the easy
configuration is finished successfully, raidcmd
terminates normally. Making Logical Drives and Hot
Spares is now completed. See the property of each
component to check the configuration. However, the
Initialize of the Logical Drives having been created
may not be completed. The progress of initializing the
Logical Drives can be checked by using "
oplist
"
command. The result of initializing the Logical Drive
can be checked by RAID Log.
> raidcmd econfig
Step 1/3 : Select RAID Controller
RAID Controller #1 LSI MegaRAID SAS 9267-8i
RAID Controller [1] :1
Step 2/3 : Set the contents of configuration
<Physical Device (Type : SAS-HDD, Sector Format : 512/512e)>
Unused Physical Device count : 4
Physical Device count using Logical Drive(s) [ 2- 4] : 3
Hot Spare count : 1
Do you continue ? [yes(y) or no(n)] : y
Maximum Logical Drive count : 1
Creating Logical Drive count [ 1] : 1
Do you continue ? [yes(y) or no(n)] : y
<Physical Device (Type : SATA-HDD, Sector Format :
512/512e)>
Unused Physical Device count : 2
Physical Device count using Logical Drive(s) [ 2] : 2
Hot Spare count : 0
Do you continue ? [yes(y) or no(n)] : y
Maximum Logical Drive count : 1
Creating Logical Drive count [ 1] : 1
Do you continue ? [yes(y) or no(n)] : y
<Physical Device (Type : SATA-HDD(SSD), Sector Format :
512/512e)>
Unused Physical Device count : 2
Physical Device count using Logical Drive(s) [ 2] : 2
Hot Spare count : 0
Do you continue ? [yes(y) or no(n)] : y
Maximum Logical Drive count : 1
Creating Logical Drive count [ 1] : 1
Do you continue ? [yes(y) or no(n)] : y
Step 3/3 : Confirm the contents of configuration
RAID Controller #1(0) LSI MegaRAID SAS 9267-8i
Disk Array #1
LD #1 [Online] RAID 5
PD e252s2 [Online] SAS-HDD
PD e252s3 [Online] SAS-HDD
PD e252s4 [Online] SAS-HDD
PD e252s5 [Dedicated Hot Spare] SAS-HDD
Disk Array #2
LD #2 [Online] RAID 1
PD e252s0 [Online] SATA-HDD
PD e252s1 [Online] SATA-HDD
Disk Array #3
LD #3 [Online] RAID 1
PD e252s6 [Online] SATA-HDD(SSD)
PD e252s7 [Online] SATA-HDD(SSD)
<Caution>
Create Logical Drive #2 with different Physical Devices of
a capacity. Therefore
,Logical Drive capacity is decided by the smallest Physical
Device of capacity.
Run the above configuration.
Initialize all of Logical Drive after creating them. You can
see the progress an
d the result of Initialize by "oplist" and "property"
commands.
Do you continue ? [yes(y) or no(n)] : yes
2
3
4
5
72
- Universal RAID Utility 1
- User's Guide 1
- Introduction 4
- Contents 5
- Overview 10
- Windows Server 11
- Linux/VMware ESX 11
- Management PC 11
- System requirements 13
- Software (Linux) 14
- Software (VMware ESX) 14
- Resources 15
- Installation image 17
- Installation (Windows) 20
- Uninstallation (Windows) 23
- Log Viewer 32
- Standard and Advanced Modes 34
- Functions of RAID Viewer 36
- Battery 38
- Flash Backup Unit 38
- Disk Array 38
- SSD Cache Disk Array 39
- SSD Cache Drive 40
- Shortcut Menu 41
- Operation View 42
- Menu Bar 43
- [OFF] goes off the lamp 45
- Status Bar 46
- Functions of Log Viewer 47
- Log View 48
- Functions of raidcmd 50
- RAID System Configuration 51
- Configuration of RAID System 63
- Making Hot Spare 64
- About Dedicated Hot Spare 65
- Making Global Hot Spare 66
- Making Dedicated Hot Spare 67
- Removing Hot Spare 68
- Capacity of Logical Drive 75
- Items set for Logical Drive 75
- Number of Hot Spares 76
- Modes of Hot Spares 77
- Mode" 78
- Deleting Logical Drive 86
- Using CacheCade 87
- Capacity of SSD Cache Drive 89
- Deleting SSD Cache Drive 90
- Maintenance of RAID System 91
- Setting Patrol Read Priority 92
- Enabled) 93
- Disabled) 94
- Stopping Consistency Check 96
- Initializing Logical Drive 98
- Stopping Initialize 99
- Setting Initialize Priority 100
- Setting cache mode 101
- Rebuilding Physical Device 102
- Stopping Rebuild 103
- Setting Rebuild Priority 104
- Setting Power Saving Devices 105
- Setting Device Standby Time 106
- RAID Viewer 108
- To Online Forcibly 109
- To Failed Forcibly 110
- Step 1 Execute " 111
- Step 3 If " 111
- Scheduling Refresh Battery 113
- Troubleshooting RAID System 115
- Failure Detection Measures 116
- Windows 117
- Buzzer in RAID Controller 118
- Logical drive 121
- Physical device 121
- Physical device (Hot Spare) 121
- [Symbols] 121
- Physical Device 122
- [Online] 122
- Logical Drive 122
- Monitoring Battery Status 126
- Monitoring Enclosure Status 128
- Tree View of RAID Viewer 131
- Property of RAID Viewer 131
- Property of raidcmd 131
- ESMPRO Manager 132
- Using ExpressUpdate 135
- Utility 136
- Avoiding TCP port conflict 137
- Operation Environment 139
- OS Fatal Error Event 140
- RAID Viewer, Log Viewer 141
- Log Rotation 142
- NEC ESMPRO Manager 143
- RAID Controller 143
- Consistency Check 143
Manuais e produtos relacionados com Controladores RAID NEC Express5800/R120f-1M
Controladores RAID NEC N8103-89 Manual do Utilizador
(128 páginas)
(128 páginas)
Indesit DVSR 5 manuals
Owner’s manuals and user’s guides for Dishwashers Indesit DVSR 5.
We providing 1 pdf manuals Indesit DVSR 5 for download free by document types: Instruction for Use
Comentários a estes Manuais